Search found 6 matches

by bugo
Wed Jan 18, 2017 1:27 pm
Forum: Electrical
Topic: Building the Cavedioboard
Replies: 14
Views: 8554

Re: Building the Cavedioboard

New update! Today we have built the battery pack with the BMS and charger! Soldering was difficult but the cell are finally well connected! But we have a problem with the BMS... We have been very careful in the connections and soldering of the BMS itself. We double checked every voltage meanwhile we...
by bugo
Wed Jan 18, 2017 8:48 am
Forum: Electrical
Topic: Building the Cavedioboard
Replies: 14
Views: 8554

Re: Building the Cavedioboard

So guys, sorry for the question above, now the motors works perfectly! We have done a mistake with the BLDC tools, now fixed! Today we start with the a123 battery pack! We are not a solder master so we have bought the cells with the wings! In the attachment there is the battery configurations with B...
by bugo
Tue Jan 17, 2017 12:33 pm
Forum: Electrical
Topic: Building the Cavedioboard
Replies: 14
Views: 8554

Re: Building the Cavedioboard

Hi guys! Finally all stuff arrived at university! Today we start connecting the two vesc to the two motors. Unfortunately there are problem in the detection of the motor parameters, both in BLDC and FOC. If we try to detect the parameters the motor start to spin jerky and the message is "Bad de...
by bugo
Fri Nov 04, 2016 7:50 pm
Forum: Electrical
Topic: Building the Cavedioboard
Replies: 14
Views: 8554

Re: Building the Cavedioboard

Thanks a lot Josh for your hint its super useful!!!! The hall sensor is a very good idea! For measure the steering angle we have also thought to a 3-axis magnetometer to fix in the hangar of the truck and a magnet in the deck. Otherwise a linear potentiometer fixed it the truck that slide on the dec...
by bugo
Fri Nov 04, 2016 7:41 am
Forum: Electrical
Topic: Building the Cavedioboard
Replies: 14
Views: 8554

Building the Cavedioboard

Hello everybody! We are Ugo and Giovanni two Italian mechatronic engineering students at the University of Trento. We are doing our final project to be presented for the master degree. It consists of a particular electric longboard. We want to electrify the Loaded vanguard flex 3 board with two hub ...
by bugo
Mon Oct 31, 2016 5:50 am
Forum: Project Files
Topic: Loaded Vanguard Deck 3D Model
Replies: 5
Views: 4163

Re: Loaded Vanguard Deck 3D Model

Thank you for the model, is very useful for me!
Have you also the solid works file? I've some trouble importing the step file.
Thanks again!

Go to advanced search